Various Environment and Testing Chambers

Climatic Test Chamber

Test Space Volume
200L, 400L and 1000L (7.1, 14.1 and 35.3 ft3)

Temperature Range
20°C to +150°C
40°C to +150°C
70°C to +150°C

Humidity Range
(10-98)%RH/ (10-98)°C

Features

Compact chamber size saving valuable floor space
Intelligent refrigeration control system
Visually attractive with large windows
Low noise
Enhanced temperature and humidity performance
High brightness LED light with long useful life
Bilateral cable ports available
Multiple independent over-temperature protection
Specimen power supply control terminal
5.7-inch TFT color touch screen program controller
Environmentally friendly refrigerant
RS-485/Ethernet centralized monitoring(optional)
GPIB interface (optional)

Thermal Shock Chamber

TS series features a choice of either two or three zones thermal shock test chamber. It circulates cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the set-point, allowing quicker recovery of the desired condition after transfer.

High Temperature Exposure Range
+60℃ to +200℃

Low Temperature Exposure Range
-70℃ to 0℃ Or
-65℃to 0℃

Features

Damper control, thermal shock without moving test samples (Basket movement is also available on request)
10.4-inch TFT colour touch screen program controller
Multiple independent over temperature protection
Specimen power supply control terminal
RS-485 centralized monitoring
Environmentally friendly refrigerant
Two-zone or three-zone capability
Most energy efficient, up to 50% savings

UV Weather Test Chamber

Product Description:
UVA Accelerated Weathering Test Chamber is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products for the performance of reliability tests is to predict product under the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.

Design standard:
ISO 4892 Features

The main technical parameters:

Temperature range: RT+10~70℃
Humidity range: =90%RH
Control mode: Balance temperature humidity control (BTHC), PID touch screen
Distance from sample to lamp: 50±3mm
Centre distance between the lamp:70mm
Wavelength ultraviolet light: UV-A: 315-400mm; UV-B: 280-400mm
Standard specimen size:75×290mm (24pcs can be tested each time)
UV, Condensation and Spray cyclic is adjustable.
Lamp: L=1200/40W, 4 set each side, total 8 sets, life more than 1600h.
Test time: 0~999H(Adjustable)
Temperature fluctuation: ±0.5℃
Materials: Inside and Outside 304# stainless steel
Irradiation blackboard temperature: 50℃~70℃
Weight: 100kg
Machine size: 500×1300×1460cm
Power: 1∮, 220v±10%, 50Hz

Xenon Weather Test Chamber

Product Description:
The test chamber adopts long arc xenon lamps as light source, which is to test the product undergone illumination, rain, condensation, temperature, humidity, and many other climatic changes. This weathering test machine is mainly for the test of non-ferrous, organic, rubber, plastic and building materials. It can provide reference for user to evaluate the products' properties and performance.

Product Features:

The machine shell uses SUS #304 stainless steel with spray, inner chamber adopts high grade stainless steel cabinet liner (SUS #304) mirror panel, which is beautiful and elegant.
With dynamic rotating sample holder, speed is adjustable.
Temperature and humidity controller adopts imported Korean TEMI 880 with high precision;
Accuracy: 0.1 (display range); Resolution: ± 0.1; temperature sensor: PT100 platinum resistance temperature body;
Equip with intelligent temperature and humidity controller, with PID adjustment and rapid self-turning. It can set several parameters to do cyclic test, directly digital temperature display for easy reading.
Temperature and humidity control with P. I. D + S.SR system coordination control with the channel;
It has automatic calculation of the function, temperature and humidity conditions can be amended immediately so that more precise control of temperature and humidity stable.

Technical Parameter:

Inner Size (D×W×H)	760500600mm
External Size (D×W×H)	120012001700mm
Temperature Range	RT ~80℃
Humidity Range	Light 45%～95% R.H; Dark 30%～95% R.H
Blank Panel Temperature	60℃~100℃ (Tolerance±3℃)
Temperature Uniformity	± 2℃
Temperature Fluctuation	± 0.5℃
Humidity Fluctuation	± 2-3%
Filter	Glass
Light Source	Air cooled long arc xenon lamp
Xenon Lamp Power	1.8KW * 3pcs = 5.4KW
Lamp Quantity	3pcs
Heating	Nickel-chromium alloy electric heater, 4.5KW
Humidification Power	Stainless steel surface evaporative humidifier, 3KW
Sample Holder	660*440mm, 1pc
Illumination Time	1~999 hours, adjustable
Lamp Wavelength	290~800nm
Irradiance range	200~1200W/m2, adjustable
Distance from Sample holder to Lamp	230~375mm, adjustable
Inside Chamber Material	SUS 304 # Stainless Steel, anti-rust, easy to clean
Outside Chamber Material	Cold-rolled steel with spray
Insulation Materials	Supper fine glass fiber, thickness 100mm
Temperature Sendor	PT100
Air circulation System	Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity
Water Supply System	Pump auto control
Control system	LCD programmable controller, auto display irradiance, capacity: 100 groups program, 99 cycles.
Communication Port	RS232 to connect computer for output
Power	AC380V, 50/60Hz, three phase, 13KW
Standard Accessories	Fuse x 3pcs; xenon lamp x 3pcs; humidification cotton x 5pcs; English user manual x 1pc; operation video x 1pc
Security Protection	Overtemperature protection, water leakage alarm, over pressure of compressor, bump overheat protection, electricity leakage protection, alarm and auto power offer protection
Test Criteria	ASTM D5071
Weight	350kg

Ozone Test Chamber

Product Introduction
Ozone Aging Programmable Test Equipment is a major factor in rubber cracking although it is rare in the atmosphere, ozone aging tank simulates and enhance the condition of ozone in the atmosphere to study the effects of ozone on rubber, and then identify and evaluate the method to resist ozone and aging for rubber, adopt effective anti-aging measures to enhance the life of rubber products.

Main function:
Can be used to test rubber products with static tensile deformation, such as vulcanized rubber, thermoplastic rubber, cable insulating bush; expose the test specimens to the sealed air in the test chamber without light and with constant ozone concentration and constant temperature according to predetermined time, and then observe the cracks on test specimens’ surface and the degree of change of other properties to evaluate the rubber’s ozone aging resistance properties.

Main feature:
Equipment by the occurrence of silent and efficient ozone generator ozone gas, and a certain amount of air processed, the switch in the mixture into the chamber, the continuous line UV detector to detect the concentration of ozone, ozone generator control feedback to the systems to control system settings according to the occurrence of effective control of ozone to the ozone chamber to maintain the appropriate concentration of work by heating humidification systems to meet all the test conditions.

Corresponding standard：
JIS K 6259 , ASTM1149 , ASTM1171, ISO1431, DIN53509 , GB/T13642, GB/T 7762-2003 GB 2951

Applicable industries:
Ozone Aging Programmable Test Equipment It is widely used to control products quality in measuring quality control; Rubber & Plastics; automobile production; wire and cable; packing materials; instruments and meters; medical equipment; civilian nuclear energy; civil aviation; colleges and universities; research laboratories; inspection arbitration, and technical supervision departments and other rubber products.

Salt Spray Chamber

Product introduction:
The machine adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.

Design standard:
CNS: 3627,3385,4159,7669,8886;
JIS: D0201,H8502,H8610,K5400,Z2371;
ISO: 3768,3769,3770;
ASTM: 8117,B268.
GB/T2423.17-2008

Control System
High precision P.I.D.temperature control meter with its error ±0.1°C.

Purpose:
Salt Spray chamber is applicable for the salt spray corrosive test for the protection layer of components,parts, electronic and electrical parts and metal materials and industrial products.

Salt spray chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement

Rain Test Chamber

Product Description:
The product is suitable for testing the adaptability and reliability of electrical and electronic products, materials, spare parts, etc, in the condition of rain and temperature. Can also be used to external lighting and signal device and vehicle lamps shell protection.

Test Standard:
GB10485-89; UL 1598 & IP6

Feature:

Studio equipped with lighting equipment
Rain time, interval time, rainfall intensity, regulate and control apart.
Adjustable Test stands rotate speed
Controller: Import FM type inverter
Times controller: Import programmable computer integrated time controller
Water pressure control: flow gauge
Observation plane: Large area of toughened glass door visualization
Water supply system, booster pump, water storage
Safety protection leakage, Short circuit, Motor overheating

Chamber Structure:

The outside layer is composed of the high quality stainless steel plate, the inner container is the composed of stainless steel tabula rasa.
Large area of visible glass door, easy to observe the test specimens in the testing chamber
The button is made of high quality of tank, can be fixed PU activities wheel, it is convenient for user moved.
Adjustable speed samples stage.

Control System:
(Germany) admiralty. Per stig moller programmable controller to complete the control of the whole system of time and sequence. Adopt imported frequency converter speed effectively guarantee the test according to the standard operation.
Equipped with water filter.

Sand & Dust Chamber

Standard
In accordance with MIL and DIN standards

Model and Specification:

Adjustable temperature range: RT+5°C～60°C (Adjustable)
Diameter of metal wire mesh:50mm
Wind speed: ≥ 7.5m/s
Wire diameter of mesh of chamber: 75～100ūm(100～200)
Blowing dust cycle (interval control) adjustable
Dosage of French chalk: 2kg~4kg/m3
Sample power: DC12V、DC24V/20A

Feature & Material:

Chamber Material : SUS 304 Stainless Steel
Transparent window is convenient to observe specimen during testing;
Blow fan adopts stainless steel shell, high sealing and wing speed, low noise;
Inside the shell is funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together.

Control System:

The controller is programmable type imported from Germany.
Mode is EASY412-AC-RC which can display time and status.
Easy setting the parameters, it can revise the parameter without entering in the programme.
Can control the total test time, chilling time, blowing dust cycle.
It’s the RKC, DC type temperature controller, RT +5°C - 60°C adjustable, the humidity of chamber can be controlled above 50% Rh.
The bottom has wheel, easy installation and operate.
Dust can add into chamber automatically, and open the valve located in the bottom of chamber can change the dust.

Safety Protection device

Temperature protection inside chamber to prevent temperature out of controller and then effect the test.
Three phase voltage too upper, phase order protection, which can prevent blowing dust fan reversing work.
It has time accumulator to prevent cannot know the involuntary time if involuntary interrupt.